BMS-820DMG+HS High Performance Digital Metal Gear 9.2kg/.09sec/45g

BMS-820DMG+HS  High Performance Digital Servo (Metal Gear) 9.2kg / .09sec / 45g

With an integral heat-sink, these servos are designed for the demands of competition racing, keeping the motor cool even when the outside temperature is hot and the servo is being overused. With a heavy duty rubber-sealed waterproof case and high-strength horn set, this servo is perfect for high-performance R/C car applications. And the output splines are compatible with aftermarket 25 tooth Futaba horns.
The servo will automatically learn the users transmitter pulse timings and lock into the signal every time. The servo also includes a signal buffer in the CPU with fail-safe functionality. The motor is wound with 2PEW thin coated wire for better electrical conductivity and is able to withstand high temperature without degradation.
The servo comes with an accessory package and the universal JR/Hitec "S" Connector which is physically and electrically compatible with all major receiver brands sold worldwide.

1. All Metal Gear
2. Double M9.6 ball bearing (si-oil)
3. Coreless motor with low RF noise (CE certified)
4. Rubber seals for waterproof case
5. Futaba compatible 25 tooth output splines
6. Heavy duty servo case
7. Integral heat sink
8. Digital motor drive with ultra-square PWM signal
9. Automatic determination of servo center pulse width
13. Digital control IC
14. MOS-FET motor driver chips

 
 
   
Weight: 45g / 1.60oz
Dimensions: 40.5 x 20 x 37 mm / 1.60 x 0.78 x 1.52 inch
Torque At 4.8V: 9.2kg/cm , 130 oz/in
Torque At 6.0V: 10.6kg/cm , 142 oz/in
Speed At 4.8V: 0.11 sec / 60° at no load
Speed At 6.0V: 0.09 sec / 60° at no load

 

 

ATTENTION
These high performance servos are very strong and have a coreless high torque motor that requires a STRONG power source. Many ESCs inbuilt BEC cannot handle such current, and will shut down the Rx.
We advise customers to use an external UBEC when using this servo.