HobbyKing™ Wingnetic Sport Speed Wing EPO 805mm (PNF)

Die Beschreibung

Introducing the HobbyKing™ Wingnetic, the distant cousin to our much loved Super Kinetic. Like its cousin, the Wingnetic is a very versatile airplane. Capable of carving out high speed passes both powered and un-powered, though throttle back, let it coast, and she slows down nicely.

The Wingnetic features a fully molded EPO foam airframe which is strong, light, and quick to assemble. Want to optimize your own setup, we offer it in three versions, plug and fly, ARF w/ Motor, or ARF (no electronics). To give it better response, a 1 piece carbon wing spar is pre-installed. A powerful 1200kv outrunner with folding propeller rockets the Wingnetic from your hand climbing to altitude in seconds.

As it has a regular elevator and separate ailerons, all you need is a simple radio, no mixing needed. Add to that a small 3S 11.1V 800mAh battery and you have yourself a fun little plane. Access the motor through the front hatch, while the battery and receiver can be reached through the rear hatch. Since the Wingnetic is a belly lander, the bottom and wing tips have pvc protection adding to the durability of the model.

In addition to being a fun power plane, the Wingnetic's ultra clean airframe makes it a great slope glider, with or without motor assist. Due to the low parts count you can be tearing up the skies in a matter of minutes. The compact nature of the Wingnetic makes it the ideal leave it in the car airplane, or pack it along with you on a hike.

Check out the HobbyKing™ Wingnetic for fast flying fun!

Features:
• Plug and Fly - Just add your choice of battery and radio system
• Wide flight envelope from high speed aerobatics to off-power gliding
• Powerful 2630 1200KV brushless outrunner motor pre-installed
• EPO foam construction
• Folding prop and spinner pre-installed
• Easy access magnetic battery hatch
• Quick assembly, low parts count

Specs:
Wingspan: 805mm
Length: 540mm
Weight: 365g
ESC: 20A brushless (JST Power Connector Fitted)
Servo: 3 x 5g servos
Motor: 2630 1200KV brushless outrunner

Required:
4CH transmitter and receiver
3S 11.1V 800~900mAh Lipoly Battery (JST connector)