Join to our channels: new products, coupons, best deals:
Racing Frames
GEPRC GEP-Mark1 5" 210mm
Multirotors → Racing FPV-Hubschrauber → Racing Frames → 5" frames → GEPRC GEP-Mark1 5" 210mm FPV Racing machine Quadcopter Frame Kit GEPRC Mark1 for 3S/4S Lipo Battery 5 Inch 5051 5042 Propeller F3/F4/Naze32/CC3D
Product Descripition:
The new GEP-Mark 1 is a multi-faceted FPV four-axis flight stand with a high-performance Freestyle flight and excellent racing capability.
Fuselage design, in the structure of the positive X, we designed the arm is not completely symmetrical. This is not to change the X structure under the premise of more effective reinforcement of the body hardness. Streamlined design allows the body to benefit from multiple, the arm is curved, the thickness is 4mm, the narrowest 13.7mm, the location of the largest in the air volume. The use of motor 3 screw hole program, is not lost in the motor and arm fixed premise, to enhance the fixed position of the motor hardness. The current split machine arm easy to loose the problem, we will add the puzzle design, so interlocking, effectively reduce the fried machine generated when the virtual position. The center of the fuselage fixed position using high-quality aluminum parts to ensure that the fuselage strong. Roof thickness of 3mm, more durable. While the roof is also streamlined design, so the middle section is getting narrower, so that resistance is reduced.
The lens can be adapted to Hs1177, Hs1190, swift, OWL Plus and so on most of the lens. 3mm thick roof, there are multiple levels of jack, you can adapt to a variety of high-definition camera installation. You need some EVA sponge to place your own camera.
There are two ways to install aluminum:
1. With 8mm column length for the built-in, space has been reduced
2. With 4mm column length for the built-in, space has improved
Basic parameters:
Model: GEP-Mark 1
Weight: 100g
Wheelbase: 210mm
The arm thickness: 4mm
Top plate thickness: 3mm
Laminated plate thickness: 1.5mm
Sandwich lower plate thickness: 2mm
Side plate thickness: 2mm
Recommended configuration: (not included)
Flight Control: F3 / Naze32 / CC3D
Motor: 2204/2205/2206/2305/2306
Electricity: 20A-30A
Paddle: 5inch
Battery: 3S 1300mAh ~ 4S 1300mAh
characteristic:
1. 3K high strength carbon plate to ensure that the frame is strong
2. The roof thickness using 3mm, more durable
3. Split the puzzle structure
4. Has 35mm body space, enough space for players to choose electronic products
5. Grade 12.9 YFS screws
6. High-quality CNC fixed aluminum parts
7. Streamlined body design
8. Equipped with GEP distribution board, with BEC (5 / 12v output, 5V maximum 3A, 12V maximum 500mA)
Note: The camera and the flight controller are not included
Package list:
Mark1 210mm frame * 1 set
Gift:T5045BN V2 propellers 3blades * 2 pairs
Share
Preise für GEPRC GEP-Mark1 5" 210mm in den Läden
Angebote gefunden: 18 ()
Siehe auch
3D Printing motor protective seat for GEPRC Mark 1
$2.28
Mark1 5" 210mm frame
$18
5" frames