CineBee 75HD Plus SPLIT 3 Nano PNP

iFlight Cinebee 75HD Plus 75mm F4 FPV Racing Drone PNP BNF w/ Runcam Split 3 Nano 1080P HD Camera

Diffirence:
1. Propellers are upgraded into HQ 40mm 4-Blade Propeller
2. FPV Camera is upgraed into Runcam Split 3 Nano 1080P HD Camera

Specification:
Brand Name: iFlight
Model: Cinebee 75HD Plus
Item Name: 75mm F4 FPV Racing Drone  w/ Runcam Split 3 Nano HD Camera
Drone Wheelbase: 75mm
Bottom & Top Plate Thickness: 1mm
Inner Standoff Height: 22mm 
Protective Guard Diameter: 42mm ( Outer 45mm)
Camera Mounting Width: 19mm 
Build Weight: 63.1g 
Flight Time: above 3min. 

SucceX Micro 16x16mm Stack - F4 OSD Flight Controller	Brand Name: iFlight Model: SucceX Micro F4  Item Name: F4 OSD Flight Controller -STM32F411 -Input Voltage 2-4S LIPO -Gyroscope: MPU6000 -2x UART ports -4x motor outputs -Built-in OSD  -No Blackbox FLASH -BEC 5V 2A cont. BF target: MATEKF411 -Size: 21x21mm -Mounting Hole: 16x16mm -Weight: 2.5g
SucceX Micro 16x16mm Stack - 12A BLheli_S 4in1 ESC	Brand Name: iFlight Model: SucceX Micro 12A Item Name: 12A BLheli_S 4in1 ESC Firmware: Blheli_S Input Voltage: 2-4S LIPO Continuous Current: 12A MCU: BB21F16G BEC: None ESC protocol: PWM, oneshot125, multishot, dshot150, 300, 600, etc. Size: 23mm*21mm Mounting hole 16*16mm Weight: 2.7g
SucceX Micro 16x16mm Stack - 5.8G 48CH PIT/25/100/200mW VTX	Brand Name: iFlight Model: SucceX Micro VTX Power : PIT/25/100/200mW Antenna interface: IPEX (UFL) Telemetry: IRC Tramp Size: 17mm*27mm Mounting holes: 16*16mm Weight: 1.6g
iFlight 1103 10000KV Motor	Brand Name: iFlight  Item Name: 1103 10000KV 2-3S Brushless Motor KV: 10000KV Configu-tation: 9N12P No.of Cells(Lipo): 2-3S Stator Length: 5.5mm Shaft Diameter: 1.5mm Top screws size: 5mm Screw hole at the bottom of the motor: 8.5mm diagonal Motor Dimension(Dia.*Len): 13.6x10.2mm Weight: 3.5g
HQ 40mm 1.6 Inch 4-Blade Propeller	Item Name: HQ 40mm 1.6 Inch 4-Blade Propeller Quantity: 2 CW & 2 CCW Color: Black -HQ for video recording, JELLOFREE, better throttle management, NOT crash resistant
Runcam Split 3 Nano 1080P HD Camera	Brand Name: Runcam Model: Split 3 Nano  Color: Black Field of View(FOV) : Recording FOV: 165°; FPV FOV: 165°@16:9, 130°@4:3 Video Resolution: 1080@60fps / 1080@50fps / 1080@30fps / 720@60fps Video File Format: MOV Image Resolution: 2 MP TV Mode: NTSC (720*480) / PAL (720*576) Switchable Interface: JST 1.25mm / UART Max Micro SD Card Supported: 64G(need Class 6 or above,                                                    Recommend Class 10 / UHS-I / UHS-II / UHS-III) Hole Distance of Installation: 20*20mm Dimensions: PCB 29*29mm / Lens Module 14*14mm Power Input: DC 5-20V(Non-direct power supply from battery. Powered direcly with battery will generate surges and burn the camera.) Working Current: 650mA @5V / 270mA @12V Weight: 10.5g
Receiver ( Optional Version)	PNP Version: Without Receiver - Flysky FS-A8S V2 Receiver - DSM2/ DSMX Receiver - Frsky R-XSR Receiver - Frsky XM+ Receiver
Recommend Lipo Battery ( All Version are NOT Included)	Recommend 2S 420mAh Lipo Battery

Package Included:
1x iFlight Cinebee 75HD FPV Racing Drone
2x Battery Strap 
1x set of Propeller Protective Guard (White) 
1x XT30U Male Connector 
1x IPEX (UFL) Antenna
2x Protective Tube for Antenna