Specification: ( Manual)
Brand Name: Hobbywing
Model: XRotor for Nano F4
Item Name: Omnibus F4 Flight Controller Integrated with OSD BEC
Firmware Version: OMNIBUSF4SD
MCU: STM32 F405
Accelerometer & Gyro: MPU6000
- With onboard OSD, controlled by F4 MCU
BEC: 5V @ 1A
Mounting Hole: 20x20mm
Size: 27x27mm
Weight: 3.3g
- Voltage Monitor: Supported
- Current Monitor: Supported
- External Buzzer: Supported
- LED Controll: Supported
- USB Port: MicroUSB
- flight controller Programming: Suppored
- Programming Via: Betaflight / Cleanflight-Configurator
Compatibel with ( Modes): PWM, Oneshot125, Oneshot42, Multishot, DShot150, DShot300
DShot600, DShot1200 and Proshot1000
Compatible with ( Transmitter): PPM, for Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL
Application: 130mm & below FPVs

Features:

-Onboard OSD microchip which supports the DMA mode allows users to adjust its parameters via
the Betaflight software. (Note: the OSD is controlled by the F4 MCU.)

-The flight controller which supports Betaflight firmware & allows parameter adjustment via Betaflight software
is more applicable to FPV race.

-TF-card which can record and save more flightack box data allows users to adjust the setup of
their aircraft easily.

- Compatible with various receivers like SBUS, SUMH, SUMD, for SPEKTRUM1024/2048, XBUS, PPM
and etc.
- LED strip signal output port allows users to adjust the color & flash mode of the LED strip via the flight controller.

- Volt/Amp monitoring port allows users to check the battery voltage ( VBAT+ port ) and current
( CRT port ) (extra current meter is needed).

- Buzzer output port allows users to connect external buzzer(s) to the flight controller for warning or informing
the flight status of the aircraft.

- Micro USB port allows users to connect the flight controller to a PC to flash firmware and adjust parameters.

Package Included:
1x Hobbywing XRotor for Nano F4 Flight Controller