Beta85X comes back now with the upgraded function which can support 4S! Fast and powerful with the 1105 5000KV motors. Updated F4 V2 4S FC and BLHeli_32 ESC, which are used single N-channel MosFETs, soldered with 25V/220uf electrolytic capacitor, will definitely give you much more power, enable you to fly on 450mAh 4S battery safely. Perfectly suitable for racing. Fully enjoy the powerful explosive force and awesome flight experience that the drone bring to you!

BULLET POINT

Beta85X pushes the new era of brushless whoop drones to a higher level. With the new power system, you could fly real acro even with EOS2 camera in racing or freestyle on 4S power.
With the high performance STM32F051K66 processor FC boards and tuned Betaflight OMNIBUSF4SD (OBSD) , faster input signals with lower latency and higher update rate are reachable, give you much more power.
Comes with upgraded F4 V2 4S FC, this FC is equipped with ports which support to plug the receiver, ESC, led board and VTX directly, no need to solder, convenient for installation.
Durable and light enough frame is customized for the Beta85X. To increase its stability, we specially add an extra stiffener brace of carbon fiber. Whole drone no soldering or tinkering necessary.
Upgraded 1105 motor from 6000KV to 5000KV, with a light weight but definitely will give you extreme power and speed to fly on 4S. Motor comes with cable connectors. Just plug and play. EMAX Avan 2" prop is the best combo in this Beta85X drone.
450mAh 4S high rate battery is recommended by default. But pilot could also use their own batteries with battery strap. Optional and affordable.

SPECIFICATION

Weight: 65.0g (without battery)
F4 V2 4S Flight Controller
16A BLHeli_32 ESC
Motors: 1105 5000KV with connector
Props: EMAX Avan 2" 4-Blades Props
FPV Camera: Customized EOS2 Camera
FPV Canopy: Canopy for EOS2 Camera
Receiver Option: Frsky XM+ / DSMX / Futaba S-FHSS / Flysky / TBS Crossfire
Battery: 4S 450mAh Battery (Not including)
5.8G FPV antenna
Beta85X Frame Kit
Carbon Fiber Stiffener Brace for Beta85X Frame
Battery strap fits for micro 2S-4S battery
Flight time: 4min - 6min with 450mAh 4S battery (smooth flight in a windless environment)

FC SPECIFICATIONS

Find more details about this 4S F4 V2 FC in another page.

CPU: STM32F405
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: Betaflight OMNIBUSF4SD（OBSD）
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)

ESC SPECIFICATIONS

Find more details about this BLHeli 32 ESC board in another page.

Support BLHELI_32
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
Input voltage: 3-4S lipo
Cotinue current: 16A
Peak current: 19A
Firmware target: BETAFPV-16A-32bit
MCU: STM32F051K66

EOS2 Camera and VTX

Find more details about EOS2 camera in another page.

Which camera is the most popular on brushless whoop drones? That must be CADDX EOS2. Ligher, smaller but still have perfect image performance. Now it is the stock camera for Beta85X drone. At the same time, the 5.8g VTX board has all the other function of the Z02 camera, like output power switchable between 0mW, 25mW and 200mW. Smart audio is available for VTX remote control in default.

The EOS2 camera comes with the FPV version of Beta85X drone. The camera tilt angle is switchable from 25 degree to 45. So that it could support different flying situations (indoors and outdoors alike).

Output power: 25mW and 200mW (Adjustable)
Smart Audio function is included for radio control
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
TV System: NTSC
Field of view: 100-120 degrees with 1/3 lens

Note: How to change the frequency or output power via remote control, please check the manual Smart Audio. Download the STL file for the customized EOS2 camera mount.

Parts Updated

This Beta85X has upgraded in every individual parts likd FC, ESC, Motor, etc. Which can support 4S power with a steady performance and bring you into a glorious FPV world.

F4 V2 FC

Extra 4 pluggable ports for ESC, VTX, RX and LED board, convenient installation and decreasing the dislocated PIN mounting.

16A BLHeli_32 ESC

Support 4S Power. Written for ESC's that utilize 32-bit MCU. With the increase in processing power, faster input signals with lower latency and higher update rate would be possible in BLHeli_32, such as Dshot1200!
Using single N-channel MosFETs on ESC board, which has a lower inner resistance. It is dual MosFETs on the original BLHeli_32 ESC board.
Current sensor included.

Soldering with 25V/220uf electrolytic capacitor, for reducing the defective rate caused by the instantaneous high voltage.

* Know more about BLHeli_32 ESC from Oscarliang's blog.

1105 5000KV Motor

Lower 5000KV for new Beta85X 4S, which could support 4S power which won't cause the issue of overheat or burn (maybe the ESC).

We DO NOT recommend the 1105 6000KV motors for 4S power because the motor may overheat or burn which will cause permanently damage on the motor or ESC. And don't use 1105 5000KV motors for 3S power, the performance will not be as good as the 1105 6000KV motors since lack of power.

Motors	Recommend Battery	Voltage
1105 6000KV	3S 450mAh Battery	11.1V
1105 5000KV	4S 450mah Battery	14.8V

Props Out

The Beta85X drone also comes with "props out" by default. Why we need "props out" direction?

Default Betaflight props direction, quadcopter dips and "washes out" in hard corners. With reversed props or "props out", no more dipping even in hardest cornering.