Eachine TX805S 5.8GHz 40CH 25-1600mW

Multirotors → Racing FPV-Hubschrauber → FPV drone electronics → Racing Drone Video TX → >=1000mW VTX → Eachine TX805S 5.8GHz 40CH 25-1600mW

$31

Im Laden

Banggood

FREE SHIPPING
Stock level: 9

↓ Ein anderes Geschäft

Click here to download the manual: tx805s.pdf

Specification:

Input voltage: 7V to 24V

5V camera supply: 220mA(MAX)----25mW@12V(Type)

5V camera supply: 470mA(MAX)----500mW@12V(Type)

5V camera supply: 550mA(MAX)----1000mW@12V(Type)

5V camera supply: 830mA(MAX)----1600mW@12V(Type)

Extra features: Smart audio

Power supply: 5V output for Camera

Output power: 25mW/500mW/1000mW/1600mW switchable

Antenna connector: MMCX

Cable connector: Solder pads

Dimensions: 36mm*22mm*5mm,30.5 stackable hole

Weight: 11.3g(excluding antenna)

Button control Channel select mode

Channel select:

Select channels by simple short presses.

Blue LED light on stands for CH1,short presses to change 8 channels sequentially.

For CH2/3/4/5/6/7/8,Blue LED flicker once,it won't light on.

Notice:Blue LED only light on for CH1

Band select:

Press button for 2S,Red LED will flash,then short presses to select 5 bands.

Power select:

Press button for 4S,Red LED will flash,then select power by simple short presses to select 25mW/500mW/1000mW sequentially,
For 500mW, Green LED flicker once,it won't light on;For 1000mW Blue LED flicker once,it won't light on .Press the button again ,
Red LED,Green LED and Blue LED lights together,Represents the highest power 1600mW.

Notice:Red LED only light on for 25mW.

Pit Mode(0.01mW)

While in Pit Mode you can change channels and set power levels , but none of these changes will take effect until you quit Pit Mode.
By default ,Pit Mode will send a very weak signal.

Two ways to exit pit mode:

Press button 12S until all 16 LED turned off and light on again to exit pit mode,or you can exit pit mode via Betaflight OSD.

Notice:The VTX has memory for settings,To change the settings ,please repeat steps as above.

Features:

-Support Smart audio

-25mW/500mW/1000mW/1600mW power switchable

-One button frequency and power setup

-OSD configuration using smart audio

-Wide input Voltage with 5V for camera

-40 channels with MIC

-Solid MMCX Antenna connection and MMCX Brass Dipole Antenna

Package included: