Holybro Kakute F7 Mini Flight Controller & Tekko32 F3 45A Mini 4in1 ESC & 40CH 25/100mW VTX

Specication:
Brand Name: Holybro
Model: KAKUTE F7 Mini
Item Name: F7 2-6S Flight Controller & Tekko32 F3 45A Mini BL_32 4in1 ESC Combo

KAKUTE F7 Mini Flight Controller

MCU: STM32F745VGH6 32-bit processor,216MHz, 320Kbytes RAM, 1Mbytes Flash

IMU: ICM20689 (SPI)

Barometer: BMP280

USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)

5.5 hardware UARTS (UART1,2,3,4,6,7)

Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only.
PPM and PWM receivers are not supported.

Onbord 16Mbytes for Blackbox logging

5V Power Out: 1.0A max

3.3V Power Out: 0.2A max

Dimensions: 33x26x6mm

Mounting Holes: Standard 20mm square to center of holes

Weight: 4g

Tekko32 F3 45A Mini ESC

Item Name: 45A BLheli_32 3-6S 4 in 1 ESC

Con. Current: 45A

Peak Current: 50A

- F3 MCU, runs double faster than F051

- 32bit ESC with BLHELI32 firmware

- Supports 3-6S lipo input

-PWM input, TLM supported

- Voltage output (VBAT)

- NO BEC

- Supports oneshot / Multishot / Dshot PWM

- Supports damped light

- Ext. cap needed for 6s (470uf 35v for 6s usage.)

- Mounting holes M2, 20x20mm

- Size:30 x 36 mm

- Weight: 7.8g

Atlatl Mini FPV Video Transmitter ( Manual)
Output Power: 0.5 mW (pit mode), 25 mW, 100 mW
Antenna Connector: MMCX
Input Voltage: 4.5 to 5.5 volts (nominal 5v power)
Dimensions: 19x16x4.5mm
Weight: 1.6g (without antenna)

Packag Included:

1x F7 Flight Controller Board
1x Tekko32 F3 4in1 45A mini ESC
1x 40CH FPV Transmitter

1x M2 Rubber rings

1x JST SH 8pin 30mm cable

1x JST SH 8pin 150mm cable

1x Electrolytic capacito: 470uF 35V

1x 8pin to 8pin 1mm pitch 65mm cable

1x 8pin to 8pin 1mm pitch 25mm cable