GEPRC GEP-F7-35A F722 AIO MPU6000

GEP-F7-35A adopts MCU STM32F722,which has powerful performance and higher computing speed.It has 5 full UART ports and can connect more external devices.We designed a 6-pin connector for DJI AIR UNIT MODULE,just plug and play.

The BLheili_S 35A ESC can handle 35A continuous current(40A burst), totally supports the 2-6S lipo battery, brings the drone a stronger flight performance.Support OSD parameter adjustment, buzzer, led and other functions. It is 8.8g ultra light weight, and 26.5mm * 26.5mm mounting hole, suitable for most of the frames on the market.We pursue lighter weight, smaller volume, more functions and better performance of FC.

Brand: GEPRC

Model Name: GEP-F722-35A AIO

MCU: STM32F722

IMU: MPU6000 gyro/accelerometer(SPI)

Firmware target: GEPRC_F722_AIO

OSD: Betaflight OSD w/ AT7456Ev

UART Ports: R1 T1 / R2 T2 / R3 T3 / R4 T4 / R5 T5

Beeper: YES

LED: YES

USB: Micro USB

BEC output: 5V@1A

Intergrated LC Filter

ESC MCU: 8BB21F16G

Continuous current: 35A

MAX current: 40A (10s)

Input: 2~6S

Supports: Dshot600,Oneshot,Multishot

BlackBox: 16Mb

Traget: G_H_30

Size: 32x32mm Board

Installing Hole: 26.5×26.5mm,M2

Weight: 8.8g

1 x GEP-F722-35A AIO

1 x XT30-7CM-18AWG Power cables

1 x 35V220UF capacitance

1 x SH1.0-6Pin to GH1.25-8Pin cables

8 x M2*6.5mm Damping rings