Eachine Tyro109 210mm DIY FPV Racing Drone PNP w/ F4 30A Caddx Turbo Eos2 1200TVL Camera

Only US$94 Coupon Code: BGANtyro109
Limited Quantity, valid to September 12th.

Notice: It is DIY Version that comes unassembled.
The propeller color is Green & Yellow & Red and Transparent White.

Upgrade Diffirence from Tyro99

1. Motor is upgraded from 2150KV to 2400KV. ( More details refer to motor's specification)

2. FPV Transmitter is installed into the drone and in new design. Not exposed outside like tyro99.

3. FPV Camera is Caddx Turbo Eos2 1200TVL HD Camera

4. Upgrade the anti-vibration insulated column standoofs.

5. 5040 4-blade propellers

6. Antenna's length was shorten in 50mm.

Specification: ( Manual )
Brand Name: Eachine
Model: Tyro109
Version: PNP ( Without Receiver)
Weight: 311g

Item	Specification
210mm Frame Kit	Wheel base: 210mm Frame arm thickness: 5mm Bottom plate thickness: 2mm Side plate thickness: 2mm Frame kit material: 3K carbon fiber & 6065 aluminium
2206 2400KV Brushless Motor	KV: 2400KV Idle current (Io/10V): 1.35A Lipo cell: 3-5S Weight: 31g Max continuous current: 35A Max continuous power: 560W Max thrust: 1180g (4S/5") Configu-ration: 12N/14P Motor resistance (RM): 0.0536 Ω Stator diameter: 22mm Stator thickness: 6mm Motor diameter: 27.7mm Motor body length: 19.2mm Overall shaft length: 34.2mm Prop adapter shaft: M5 Bolt holes spacing: 16mm Bolt thread: M3 Propeller: 5-6 inch
4 IN 1 30A BLHeli_S ESC	Continuous current: 30A Burst Current: 40A(10S) Input voltage: 2-5S BEC: 5V 2A BEC Main control chip: 48Mhz EFM8BB2 Firmware: BLHeli_S supports Dshot600 MOS: 5*6
Customized F4 Flight Controller	Main control chip: STM32F405 Sensor: ICM20602 Power supply: 5V Integrated OSD Onboard LC filter PID cycle rate & gyroscope refresh rate up to 32Khz Supports BetaFlight / inav racing firmware
Caddx Turbo Eos2 1200TVL Camera	FOV: 160° WDR: Global WDR DNR: 2 DNR Lens: 2.1mm TV System: NSTC / PAL Optional Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 Latency: min 3ms Resolution: 1200TVL Min. Illumination: [email protected] Wide Power Input: DC 3.3-6V Work Temperature: -20℃~+60℃ Image Sensor: 1/3 inch COMS Aspect Ration: 4:3 S/N Ratio: >52dB (AGC OFF) Video Output: CVBS Auto Gain Control: YES BLC: YES Dimensions:14mm14mm16mm
Xf5804 5.8G 40CH 0mW/25mw/200mw/600mw switchable VTX	Output power & transmission distance: ≥0.5km@25mW, ≥1km@200mW, ≥2km@600mW Transmitting power: 0mW/25mW/200mW/600mW Full video format: NTSC /PAL Input voltage & power dissipation: 7V~24V, +12V/260mA@600mW Size: 20309mm Weight: ≤7g(except antenna) With output power self-check function. Nixie tube SCAN: frequency point (1-8), frequency band (A-E), power (1-3, 0=0mw, 1=25mw, 2=200mw, 3=600mw) Frequency control method: Button frequency control (1-8): press the button for 2 seconds to enter the frequency setting, and press the button to change the frequency CH1-8.Change the frequency band (A-E), set the frequency, press the button for 2 seconds, then press the button to change the frequency group FR (A-E)
Pagoda Antenna	Gain: 5dBi Max. Power: 50w Connector: RP-SMA Color: Black Weight: 8.6g Length: 78±3mm Max. Dia.: 22.4±1mm Min. Dia.: 11.8±1mm Frequency: 5.8G Impedance: 50Ω VSWR: <1.5:1 Polarization: Circular Polarized Radiation: Omni
5040 5 Inch 4-Blade Propeller	Material: PC Mounting hole: 5mm Center thickness: 8mm Quantity: 2 CW + 2 CCW ( Same Color) Color: Green & Yellow & Red and Transparent White ( Delivery color randomly)
Battery	Not included Recommend 3-5S