Join to our channels: new products, coupons, best deals:

Tinywhoops

iFlight Alpha C85 2" 85mm 4S Caddx Loris 4K PNP

Multirotors → Tinywhoops → Cinewhoops → iFlight Alpha C85 2" 85mm 4S Caddx Loris 4K PNP
iFlight Alpha C85 2

The long requested BNF is finally ready for everyone! Our converted Alpha C85 in a popular CineWhoop pusher configuration for a Insta360 or naked GoPro Hero to shoot the most insane footage ever. Camera and camera case not included but sold separately!

iFlight Naked GoPro Hero 8 Case TPU with BEC Board: LINK


Tips:

VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.


Features：

  • Pusher configuration style frame kit
  • Butter smooth XING1303 5000KV for more torque and efficiency with longer flight times compared to 11xx motors 
  • Camera and batteries are placed on the top of the drone for better CG and better control
  • Universal camera mount for various cams and insane footage
  • Pre-tuned with smooth cinematic settings


Alpha C85 Analog BNF Specs:


PRE-TUNED & PRE-SETUP:

- Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"

- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"


Alpha C85 Analog Quad BNF Included Components and Parts

  • Prebuilt and tested Quadcopter
  • 1x Alpha-C 85mm Frame
  • 1x CADDX Loris 4K Camera
  • 1x 5.8G SucceX Micro Force VTX 300mW
  • 1x Albatross RHCP ipex 5.8g light antenna
  • 2sets HQ 2 inch 4-blades (each 4 props - Color May Vary)
  • 1x iFlight Lipo Strap


FC // SucceX-D 20A F4 Whoop AIO

*Size：30.5*30.5mm

*Mounting pattern：25.5*25.5mm/φ3mm

*Connector：Micro-USB

*MCU：STM32F411

*Gyro：MPU6000

*Blackbox：8MB

*BEC output：5V 2A

*INA pad：UART2 (nR2) 

*Barometer：no

*Constant current：20A，25A（Burst）

*Input：2-4S

*Current sensor：yes

*BLHeli：BLHeli-S

*ESC Telemetry：no

*Target：IFLIGHT_F411_PRO

*ESC Firmware：G-H-30 BLS


5.8GHz SucceX Micro 300mW VTX

-Power: PIT/25/100/200mW/300mW

-Antenna interface: IPEX (UFL)

-VTX protocol : IRC Tramp

-Size: 13.5x14.5mm

-Weight: 1.4g

- Mini VTX size: 20x20mm, 2mm hole, total weight (incl. VTX): 3.4g


Additional Suggested Parts

  • Battery 4S 450mAh

Siehe auch

iFlight Alpha C85 2
iFlight Alpha C85 2" 85mm 4S Caddx Loris 4K BNF Frsky XM+ FCC
$187
iFlight Alpha C85 2
iFlight Alpha C85 2" 85mm 4S Caddx Loris 4K BNF Frsky XM+ EU LBT
$181
iFlight Alpha C85 2
iFlight Alpha C85 2" 85mm 4S Caddx Loris 4K BNF R81-SPI Frsky
$181
iFlight Alpha C85 2
iFlight Alpha C85 2" 85mm 4S Caddx Loris 4K BNF FrSky R-XSR FCC
$194
iFlight Alpha C85 2
iFlight Alpha C85 2" 85mm 4S Caddx Loris 4K BNF FrSky R-XSR EU LBT
$188
iFlight Alpha C85 2
iFlight Alpha C85 2" 85mm 4S Caddx Loris 4K BNF TBS Crossfire Nano RX
$205
iFlight Alpha C85 parts
iFlight Alpha C85 parts
Cinewhoops
Cinewhoops
Join to our channels: new products, coupons, best deals:
↑