RushFPV Rush Blade F722 + 60A Super 96K Digital

FPV → HD Video Links → DJI FPV Digital HD → Flight Controllers for DJI Digital HD → RushFPV Rush Blade F722 + 50A Sport DJI → RushFPV Rush Blade F722 + 60A Super 96K Digital

Brand: RUSHFPV

Item Name: RUSHFPV RUSH Stack Combo BLADE F722 + SUPER Edition 60A 3-6S BLHeli_32 4-in-1 ESC For HD DJI Digital

RUSHFPV RUSH BLADE F722 Flight Controller For DJI Digital FPV System:

RUSH BLADE F722 30x30 Flight Controller by RUSHFPV for your DJI Digital FPV System. This FC features high-performance STM32 F722 MCU, MPU6000, and Onboard OSD.

Features:

High-performance STM32 F722 MCU with speeds up to 216MHz. • Using MPU6000 with integrated accelerometer and gyroscope, stable and reliable.

Built-in16M black box,Barometer,5 UART ports, 6 pwm output ports, 2 ADC ports, 1 l2C port.

Integrated dual 40V input synchronous rectifier power supply, and built-in power filter, up to 8S lipo battery power supply, 5V SA /10V 3A output provides sufficient power, you can connect more external devices.

Modular cable design, with reliable locking structure, can be installed quickly, while retaining full-featured pads on the back, providing more expansion support.

Optimized for stack installation, the single-sided component placement method makes the thickness thin, and the bottom is covered with complete copper to resist ESC Interference.

The full-covered lightweight metal shell protects internal electronic components and provides perfect heat dissipation.

Specifications:

MCU: 216MHz

GYRO: MPU6000

OSD: Onboard

Input Voltage: 3-8S

BEC: 5V/5A 10V/3A

Mounting Holes: 30.5mm x 30.5mm

RUSHFPV Super Edition 60A 3-6S BLHeli_32 4-in-1 ESC :

Features:

-BLHeli 32 firmware is the third generation of BLHeli firmware, following base BLHeli and BLHeli-S.

32-bit microprocessor running at a frequency of up to 48Mhz (F051)/168MHz(F350) for an excellent performance.

-Supports up to 96K PWM frequency (60A version), so the response speed is faster and smoother, reducing mid-throttle oscillations.

-Equipped with double-sided lightweight metal armor to avoid hardware damage caused by crashes, and the armor can effectively assist the MOSFET to dissipate heat.

-Double PCB board design, high current circuit, and signal circuit are independent of each other.

-All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also causing active freewheeling.

-Supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us) and Multishot (5-25us).

-Dshot signaling is supported at any rate up to at least Dshot1200. The input signal is automatically detected by the ESC upon power-up, No need for throttle calibration.

Supports beacon functionality, where the ESC will start beeping after a given time of zero throttles. This can be very useful for finding a lost drone.

Specifications:

Rated Current: 60A

Peak Current:80A

Input Voltage: 3-6SLipo

MCU: F350 168MHz

PWM FREQ: 96K

LED Color: Pink

Weight：16.5g

Dimension: 45*36.5*7.5mm

BL32 FW: RUSH_BLADE_SUPER

Package Included:

1 x RUSH BLADE F722 30x30 Flight Controller For HD DJI Digital