GEPRC CineQueen 3" 4K Hybrid Frsky XM+

Multirotors → Racing FPV-Hubschrauber → RTF/ARF/PNF → 3" Quads → GEPRC CineQueen 3" 4K Hybrid PNP → GEPRC CineQueen 3" 4K Hybrid Frsky XM+

Features:

HD recording no propellers in view
3-inch propeller with guard(New Propeller Guard: Better airflow, higher flight efficiency).
Runcam Hybrid 4K Video Recording: 4K@30fps / 2.7K@60fps / 2.7K@50fps / 1080P@120fps / 1080P@100fps / 1080P@60fps / 1080P@50fps
Dual Camera System: True 145° Wide Angle 4K HD & FPV Camera.
STABLE V2 F4 30A SYSTEM.
500mW VTX Power: Effectively improves your flight distance.
Full Soft Mounted FC System: Provides a clean operating environment for gyro.
Say Goodbye to Jelly: Stable video, and comfortable FOV.
Improved GEP-CX3 Frame: Full 3K carbon fiber, 7075 aviation aluminum, High-precision CNC. Rugged and durable frame, Better protection for the 4K camera.
New Propeller Guard: Better airflow, Higher flight efficiency.
High Efficiency Motor: GEP-GR1206 3600KV Motors.
Taillight Design: Eye-catching night view and lighting effects.
Exquisite Assembly Process: Eliminate any potential installation problems.

Specification:

Model Name: CineQueen 4K
SYSTEM:STABLE V2 F4 30A
Camera:Runcam Hybrid 4K
Motor:GEP-GR1206 3600KV
Propeller:3inch 3-blade
VTX 5.8G 500mW
Antenna:Momoda 5.8G RHCP
Input Battery: 3-4S(4S 650mAh – 4S 850mAh)
Receiver option: Frsky XM+ / Frsky R-XSR / TBS NanoRX / FlySky A8SV2
Weight:156g(without battery)

Frame:

Frame Model:GEP-CQ3(Improved version,Including Guards)
Full 3K carbon fiber
Wheelbase:145mm
#7075 Aviation aluminum CNC
High efficiency 3-inch guard
Top plate thickness:3mm
Bottom plate thickness:3mm

Electronic System:

STABLE V2 F4 Flight Controller Specs:

MCU: F405
IMU: MPU6000 gyro/accelerometer (SPI)
OSD: BetaFlight OSD w/ AT7456E chip
Baro:NO
BEC Output: 5V@3A
Integrated LC Filter
Firmware target: OmnibusF4SD

STABLE V2 F4 ESC 4in1 Specs:

Constant:30Amps
Burst:35Amps
Supports Dshot600,Proshot,Oneshot,Multishot
Current meter: Yes
Target: G_H_30

STABLE F4 5.8g 500mW VTX Specs:

Channel: 48
Power transmission: 0mW(Pit mode) / 25mW / 100mW / 200mW / 400mW/ 500mW
Connector type: MMCX Connector
Traditional button
IRC Tramp protocol

STABLE F4 Manual:GEPRC-STABLE-V2-F4-MANUAL-V1_0.pdf

Specifications(Runcam Hybrid 4K):

HD sensor:SONY 8MP
Analog sensor:SONY 1.3MP
Field of View (FOV):HD Recording FOV 145°(FPV FOV 150° @ 4: 3)
Video Resolution:4K@30fps / 2.7K@60fps / 2.7K@50fps / 1080P@120fps / 1080P@100fps / 1080P@60fps / 1080P@50fps
TV Mode:NTSC (720*480)/PAL (720*576) Switchable
Interface:HD supports UART remote control; FPV(Analog) supports UART fimrware update.
Lens Specs: HD Lens : M10 FPV Lens : M8
Power Input:DC 5-20V (Non-direct power supply from 4s battery or above. Powered directly with battery will generate surges and burn the camera.)
Working Current:480mA @5V / 140mA @12V

Max Micro SD Card Supported: Up to 128G. U3 recommended (2.7K60/1080P120 requires U3 or above; other solutions require U1 or above) Please make sure that the file format of the SD card is FAT32, otherwise, it will easily cause errors.

Runcam Hybrid 4K:

Manual