iFlight SucceX-D F7 TwinG HD + 60A 4in1

The SucceX-D F7 is designed to work seamlessly with DJI’s new HD FPV system. To make things as simple as possible, we have included a connector specifically for the DJI air unit, so installation should be a breeze. In addition, we add the popular and reliable USB Type-C instead of Mic.ro USB which makes the connection easily.

Features:

• Uni versal USB Type C connector instead of mi cro USB

• Plug-and-Play. No need to solder tiny wires.)

• Supports BLHeli pass-through for easy ESC upgrade and configuration.

• Designed to support DJI Digital FPV.

SucceX-D F7 TwinG  SPECS:

- MCU: 216MHz STM32F722RET6

- G.yro: 2x ICM20689

- Baro: YES

- Betaflight OSD: YES

- Blackbox: 32MB

- 5 x Uarts

- 8 x Motor outputs

- 8 pin 4in1 ESC port

- 4-pin VTX connector

- Betaflight Firmware: betaflight_4.0.5_STM32F7X2.hex

- CLI config: IFLIGHTF7_TWIN_G.config

Physical:

- Mounting hole: 30.5*30.5mm,φ4mm with Grommets φ3mm 

- Size: 36*36mm 

- Weight: 7.5g 

SucceX 60A BLHeli_32 4-in-1 ESC

Features:

- 8 layers single-board stacking PCB board;

- 4oz 1.6mm thick power board(0.9mm copper ratio),better operating load capacity;

- 32bit FO51K86 MCU,48mHz running speed;

- T.DK MLCC Low ESR ceramic capacitors;

- Top grade metal MOSFET;

- Rational layout, countersunk holes on extended motor soldering pad enable each layer board can be powered.

Specification:

- Dimension:43x39mm

- Mounting Holes: 30.5*30.5mm/Φ4mm

- Weight: 13.4g

- Supports 2-6S lipo input

- STM32F051 MCU, 48Mhz Runs BLHELI 32.X Firmware

- Current sensor: Yes

- BEC: No

- Supports: DShot DShot150/300/600/1200/MultiShot/ OneShot etc.

- Target: iFlight-BL32-4 in 1

Package included:

1 X SucceX-D F7 TwinG FC

1 X SucceX 60A BLHeli_32 4-in-1 ESC