Hermit 145 FPV Drone w/Motors/ESC/Flight Controller/Receiver (Kit) (Low Latency Version)

Die Beschreibung

For those that prefer to DIY the Hermit 145 FPV drone is now available in kit form. 

With a DSM2 compatible 7 channel receiver already integrated into the MX OVERSKY 32 flight control board all you need to do is bind the quad to your transmitter, when you have finished construction and fly. Bright LED Lights are designed to make the Hermit stand out as well as aiding orientation when flying line-of-sight.

The fun doesn't end there...the Hermit is FPV ready right out of the box too! The built in MX-VTX-B 5.8GHz A/V transmitter gives a clean 200mW of power and a choice of 8 channels. A high quality clover-leaf antenna ensures that the picture from the 20P/30F 120° lens, forward mounted camera gets back to you without loss. This is the analog version with zero latency.

With its carbon fiber frame and turned alloy spacers the Hermit 145 is a light and tough little quad, while the 4 x MP05 4000kv brushless motors provide plenty of power for high energy flight. All in, the hermit 145 is an amazing little multi-rotor and a fun to fly, incredibly complete package requiring only your own DSM2 compatible transmitter, FPV goggles and a battery charger to get going. 

Features:
• Integrated DSM2 compatible 7CH receiver outputs data through serial port
• Supports outside receivers such as PPM, DSM2/DSMX, SUMD or SBUS
• Plug and play design with very litle to do to get airborne.
• Integrated with DSM2 compatible 7CH receiver;
• Low Latency 

Specs:
Weight: 67g (not including battery)
Flight weight: 103g (including 450mAh 25C 7.4V battery)
Maximum flying weight: 120g
Flight time: Approx 9 minutes ( with 2S 450mAh 25C battery, VTX and DV turned on)
Motor to motor distance: 145~155mm adjustable
View angle: +/- 25 angle adjustable
Brushless motor: weight 3g, KV 4000
5.8G VTX (200MW): Includes clover antenna, 6.0 grams
Super light DV: 720P/30F and with 120-angle lens, (Micro SD is not included).

Includes:
1 x  Hermit 145 kit
1 x  Set of spare propellers (4 props)
1 x  2S 450mAh Lipoly (25C)