TrackStar Corner Weight System - for 1/8, 1/10, 1/12 Car Chassis (UK Warehouse)
672 g
Die Beschreibung
TrackStar Corner Weight System is designed for serious racers to measure their cars’ corner weight distribution easily, and make necessary weight adjustment to balance their cars for the best performance.
TrackStar Corner weight scales allow precise car weight distribution which is critical to on track success. The four corners of the car may be bearing different amounts of the car weight. The unequal corner weights can be felt as the car rolling more when turning in one direction than the other. The car’s stability is compromised which will adversely affect its balance. A well balanced car is generally easier to drive quicker due to the car increased stability.
To make sure weight percentages are correct, computerised scale systems must be used. Correct chassis setup separates the front runners from the followers. Corner Weight Scales provide the necessary data for anyone to become a chassis expert.
Ideally the car should have 50% of its weight on the Left Front and Right Rear tires, and 50% on the Right Front and Left Rear. If your car's diagonal corner weights are not equal then its handling will be unbalanced - it will turn better in one direction than in the other (all other things being equal).
TrackStar Corner Weight System consist of one main unit and four separate scales, the maximum weight limit for each scale is 2000 grams.
Features:
• Designed for 1/8 buggy and truck, 1/10 buggy & touring car and 1/12 car.
• Measure the car’s corner weight, front and rear distribution and make adjustment if necessary.
• The maximum weight limit for each scale is 2000 grams.
• Measurements can be displayed in gram, oz.
• Highly accurate weight measurement in 0.1g increments (equivalent to 0.01 oz).
• Powered by external DC source (6~13.8V).
Specs:
Maximum weight of each scale: 2000g
Tolerance: ±0.5g
Power source: External DC source(6~13.8V)
Main unit dimension (length x width x height): 130.4x104.5x35.3mm
Scale dimension (length x width x height): 59.1x65.1x17.5mm
Net weight of Main unit & 4 scales (not including battery): 393g
Die Dynamik der Preise
Kombo-Waren
Die folgenden Waren kann man mit dem kombo-Rabatt kaufen, wenn sie in den Korb zusammen mit TrackStar Corner Weight System - for 1/8, 1/10, 1/12 Car Chassis (UK Warehouse) zu legen. Seien Sie aufmerksam: auf diese Waren kann der vorteilhaftere Buddy-Rabatt oder der Promo-Rabatt gelten.SKU: 9171000216 | Turnigy Magnetic Tool Stand for Hex and Screw Drivers (UK Warehouse) 283 g |
SKU: S640A | Turnigy Long Shaft 4pc Hex Driver Set (UK Warehouse) 219 g |