Turnigy Trackstar 80A Turbo Sensored Brushless 1/12th 1/10th ESC (ROAR approved) (EU Warehouse)

Die Beschreibung

Introducing the Turnigy Trackstar 80Amp TURBO 1/12 and 1/10 Sensored brushless car ESC.

Featuring a CNC alloy case top which incorporates the heatsink for the Mosfets, neat terminal cups for both the battery input and ESC output cables. The ESC software has a large number of user programmable settings such as Punch, initial brake, drag brake, boost timing RPM, boost timing, Turbo timing, Turbo delay, Turbo ramp, boost acceleration - allowing this ESC to be customised in nearly every way you could ever need for 1/12 or 1/10 scale on or off road racing!

So what is Turbo? Well simply put - Turbo is a short duration burst of top end motor RPM and power - best used sparingly, it is similar in effect to KERS on the current Formula 1 cars! The Turbo function is fully user programmable too!

Spec:
Max Voltage: 2s Lipo / 6 cell Nimh
Motor limit: 10.5T
Resistance: 0.0004 ohm
Operating current: 80A
Burst Current: 380A
Bec Current: 3A
Bec Voltage: 6V
Weight: 45g (without cables)

Programming Options:
Operation Mode: Forward/Brake/Reverse; Forward/Brake Only
Initial Brake: 10% ~ 80%
Drag Brake: 0% ~ 40%
Brake Strength: 50% ~ 100%
Voltage Cutoff: None ~ 3.5V/cell
Punch Profile: Level 1 ~ 9
Neutral DeanBand: 1% ~ 8%
Boost Timing: 0deg ~ 60deg
Turbo Slope: 3deg/0.1s, 6deg/0.1s, 12deg/0.1s, 18deg/0.1s, 24deg/0.1s, Fastest
Turbo Timing: 0deg ~ 30deg
Boost Timing RPM: 2000 ~15000
Turbo Delay: Off, 0.05sec, 0.1sec, 0.15sec, 0.2sec, 0.25sec, 0.3sec, 0.35sec, 0.4sec
Boost Timing ACC: 50RPM/deg ~ 700RPM/deg
Reverse Speed: 25% ~ 100%
Drive Frequency: 8Khz, 16Khz, 24khz
Brake Frequency: 1,2,4,8,16Khz
Temperature protection: On/Off

Now officialy approved by ROAR for stock class race use!