Phoenix 1380 EPO Composite R/C Glider (PNF)

Die Beschreibung

The latest version of the Phoenix glider has a 1380mm wingspan and as per the 1600mm / 2000mm versions, the airframe only takes 15 minutes to assemble and lasts a lifetime! The wings and tail are made from tough EPO foam. However, the fuselage is made from a super strong blow moulded nylon skin with plywood formers, making it almost indestructible. The virtually indestructible fuselage is smooth and rigid yet still light enough for the glider to perform. The main wing is joined together with a plywood spar and adhesive (included), whilst the tail section is screwed firmly into place. The wings are secured to the fuselage using rubber bands which is great for a beginner, for in the event of a heavy wing down arrival the wing will detach from the fuselage and hopefully will not get broken which is highly likely if the wing is firmly bolted into place . 

The main wing includes 1 servo per aileron for strong control surface movement. All 4 9g servos, 20 Amp speed controller and brushless outrunner are pre-installed. Just add your own transmitter / receiver and battery to be flight ready! This really is a super strong glider that will have you flying in no time at all.

Specs:
Wingspan: 1380mm (54.3 inch)
Length: 840mm (33.1 inch)
Weight: 560g (without battery)
Battery required: 1000~1300mAh 2~3S
Motor: Brushless 2826 (included)
ESC: 20A (included)

Required:
LiPoly 1000~1300mAh 2~3S
Tx/Rx