Big Stick Laser Cut Balsa Kit 1060mm (Kit)
SKU: 099000033
1205 g
Die Beschreibung
Here's a model that is bound to please those who enjoy the build!
Our Big Stick is supplied as a crisp laser cut balsa kit that traditional builders will enjoy assembling, this is no 5 minute build!
All of the pre cut components are in top quality balsa and light ply. Construction is straight forward with most parts slotting into place with tabs.
The built model is a great park flyer and looks great if covered in transparent iron on film.
Note: Please refer to the build instructions under the 'Files' button below.
Spec:
Span: 1060mm
Length: 780mm
Kit Weight: 310g
Requires:
Radio: 4 Channel system
Motor: 2826 - 2200Kv
Prop: 7x4
Esc: 20A
Battery: 3s 2200mAh
Servos: 4 x 9g
Building supplies: Adhesive, Covering film & Hobby knife
Span: 1060mm
Length: 780mm
Kit weight: 310g
Radio: 4 Channel system
Motor: 2826 - 2200Kv
Prop: 7x4
ESC: 20A
Battery: 3s 2200mAh
Servos: 4 x 9g
Building supplies: Adhesive, Covering film & Hobby knife
Die Dynamik der Preise
Kombo-Waren
Die folgenden Waren kann man mit dem kombo-Rabatt kaufen, wenn sie in den Korb zusammen mit Big Stick Laser Cut Balsa Kit 1060mm (Kit) zu legen. Seien Sie aufmerksam: auf diese Waren kann der vorteilhaftere Buddy-Rabatt oder der Promo-Rabatt gelten.SKU: HXT900 | HXT900 Micro Servo 1.6kg / 0.12sec / 9g 19 g |
SKU: TX-9X-M2 | Turnigy 9X 9Ch Transmitter w/ Module & 8ch Receiver (Mode 2) (v2 Firmware) 1375 g |
SKU: TX-9X-M1 | Turnigy 9X 9Ch Transmitter w/ Module & 8ch Receiver (Mode 1) (v2 Firmware) 1375 g |
SKU: HC-50-175C | HobbyKing Super Glue CA (50g / 1.7oz) Medium 89 g |