Turnigy 1/10 Brushless 2WD Desert Racing Buggy ARR (US Warehouse)
Die Beschreibung
Equipped with a 60A brushless system, oil filled shocks, and fully adjustable suspension, this 1/10 2WD Desert Buggy is ready to tear up your local track!
The Turnigy 2WD Desert Racing Buggy performs just as good as it looks. Its 3300KV brushless motor provides plenty of torque, and an impressive top speed. On a 2S Lipoly, it will pull the front wheels off the ground easily when running on pavement, but this machine really shows its capabilites off road, tearing through the corners and soaring over jumps.
The Turnigy Desert Buggy comes almost ready to run, just add a 2S Lipoly batttery, 2CH radio system, and you are set to go!
*This buggy features a full metal gear transmission and adjustable slipper clutch
Spec.
Motor: Brushless Inrunner 3300KV (3650 size)
ESC: 60A Brushless (60A Constant, 85A Burst, w/reverse) (HXT4mm discharge plug installed)
Battery: 2S 7.4V Lipoly [Required]
Length: 465mm
Width: 290mm
Height: 170mm
Battery Tray Dimensions: 188x27x49mm
Required.
2S 7.4V 4000~5000mAh LiPoly
2CH Radio System (Rx/Tx)
Motor: Brushless Inrunner 3300KV (3650 size)
ESC: 35A Brushless (35A Constant, 85A Burst, w/reverse) (XT-60 discharge plug installed)
Battery: 2~3S Lipo (2S recommended) [Required]
Length: 465mm
Width: 290mm
Height: 170mm
Battery Tray Dimensions: 188x27x49mm
Die Dynamik der Preise
Kombo-Waren
Die folgenden Waren kann man mit dem kombo-Rabatt kaufen, wenn sie in den Korb zusammen mit Turnigy 1/10 Brushless 2WD Desert Racing Buggy ARR (US Warehouse) zu legen. Seien Sie aufmerksam: auf diese Waren kann der vorteilhaftere Buddy-Rabatt oder der Promo-Rabatt gelten.SKU: 249000093 | Upgrade Steering knuckle arms L/R - A2030, A2031, A2032 and A2033 25 g |
SKU: T5000.2S.20HC | Turnigy 5000mAh 2S1P 20C Hardcase Pack (ROAR APPROVED) (US Warehouse) 358 g |
SKU: T4000.2S.30HC | Turnigy 4000mAh 2S 30C Hardcase Pack (ROAR APPROVED) (US Warehouse) 349 g |
SKU: 249000101 | Upgrade Rear metal shock absorber - A2030 and A2031 59 g |
SKU: 249000099 | Upgrade Rear susp Arm Holding Block - A2030, A2031, A2032 and A2033 23 g |
SKU: 249000092 | Upgrade ball bearing (2pcs) - A2030, A2031, A2032 and A2033 15 g |
SKU: 249000097 | Upgrade Wheel hub (4pcs) - A2030, A2031, A2032 and A2033 19 g |
SKU: 249000102 | Upgrade Servo saver - A2030, A2031, A2032 and A2033 43 g |
SKU: 249000096 | Upgrade Front susp Arm - A2030, A2031, A2032 and A2033 25 g |