TBS Tango 10ch FPV RC Transmitter with 5.8GHz Video Receiver

Die Beschreibung

The TBS Tango Transmitter is an all in one RC control system for FPV enthusiasts. It features a built in 5.8GHz 40ch video receiver and a slot for JR compatible radio modules, has a large anti-glare, anti-reflective 4.2 inch display for live stream video and the option to connect external goggles.

The TBS Tango is the next evolution in RC transmitters, it is the first of its kind to be designed specifically with FPV in mind. From its ergonomic shape which molds to the palm of your hands to its quality ball bearing gimbals and pre-programmed settings it is the transmitter to have when FPV flying and Drone racing. The Tango transmitter is stick mode selectable, 4 modes can be configured, Modes 1, 2, 3 and 4 (see manual for details).

Trying to configure models is a thing of the past with the TBS Tango, it comes pre-programmed for all modern flight controllers. With 10 channels it provides plenty of capability for moderately sized camera platforms whilst being the perfect stablemate for FPV racers. It has multiple arming/disarming and smooth spring loaded dials and rocker switch.

The built-in 5.8GHz 40ch video receiver is precisely tuned to its environment delivering unparalled range. The built-in receiver 5dBi patch antenna covers 180 degrees in a forward facing direction. Using the external "TBS Port" you can connect any goggles to the Tango for a crystal-clear video reception and long lasting power without requiring external batteries.

The Tango does not have an RF module, it does require the popular JR style RF module to achieve this which is compatible with most of the RC systems out there. The Tango is also ready for full telemetry support from most systems.

Features:
• All in one 10ch FPV RC transmitter with built-in video receiver
• Ergonomic design
• Compatible with JR style RF modules
• Large anti-glare, anti-reflective 4.2 inch LCD display screen
• Built in 5dBi patch antenna for unparalleled range
• Quality ball bearing gimbals
• Digital trims
• Spring loaded dials and rocker switch for smooth control
• High capacity 6000mAh Lithium-ion battery, charged via USB
• External port for goggles
• 15 model memory
• Pre-programmed for most flight controllers
• Accepts software updates via USB port

Specs:
Channels: 10
FPV System: 5.8GHz VRX receiver with 40ch
FPV Channels: Boscam A, B, E, Fatshark, Raceband (see manual for frequency chart)
Antenna: 5.8GHz 5dBi patch antenna with optional external SMA port
Display: 4.2" LCD, 640 x 480p
RC Module Compatibility: JR compatible RF module with CRSF or PPM stream with max rating -0.3V~15V, example: TBS Crossfire, JR, Turnigy, FrSky and similar modules
Battery: 3.6V 6000mAh Li-ion
Range: This is dependent on the output power of module etc (please see note at bottom)
Ports: RJ45 connector suitable for Fatshark etc
         DSC for trainer connection
         USB for software updates
Controls: 2 x Quad ball bearing gimbals
             2 x 2 position switch
             2 x 3 position switch
             2 x Spring loaded dials
             2 x Digital trims
             3 x Video Rx buttons
                 1 x Rocker switch
Working Temp: 0~40°C
Dimensions: 240 x 170 x 55mm
Weight: 340g (without module)

Included:
1 x TBS Tango RC transmitter with 5.8GHz video receiver
1 x TBS Tango neckstrap
1 x RJ45 Audio/video cable

Please note:
This system is capable of using radio frequency transmissions and output power that may exceed the regulations in your country. Please always check your local RF legislation to set the frequency and output in accordance with those regulations. A general rule for RC flying models is that they must be kept within line of sight distance.

Manual available under the "Files" tab.